iRIS4 is the most convertible fire alarm panel in Teletek portfolio. The panel offers a huge variety of functionalities, which help the installers for any type of installations – from small to large buildings. iRIS4 fits up to 4 loops and has a maximum coverage of 96 zones. Up to 250 devices can be connected to every system loop, with a total of 1000 for the whole system. The information for the system status is visualized on sensitive graphic display and LED indication for the zones and troubles. iRIS4 supports Teletek’s protocol for communication in order to provide a vast range of devices and cope with the most demanding projects. Combined with the modular structure and the networking features there is no project which can’t be accomplished with iRIS4. The initial purpose of iRIS4 is to be used for fire alarm warning but due to its flexible design it can be modified to carry out many other functions like control and indication applications, with direct integration into intelligent buildings through MODBUS protocol.
iRIS8 is the latest generation of addressable fire alarm panel in the Teletek Electronics portfolio. The possibility to integrate eight loop expanders into a single system makes the panel suitable for use in small to large buildings and installations. The panel itself has a modular structure “4+4” loops, which further helps in designing a wide range of projects. Improved for networking with Teletek panels makes it applicable for very large projects as well. With the possibility to communicate via ModBUS protocol, the panel becomes easy to integrate into a Building Management System (BMS) for so-called “smart buildings”. It supports the ModBUS TCP/IP and RS485 communication protocols, thus enabling the construction of a network with up to 64 panels. The IRIS8 is the first Teletek panel that can work with its new range of wireless detectors. Due to the fact that the panel has two processors (one main and one backup), it can work with more than 512 devices, both in normal and fault mode. Under system mode failure means a failure in the main processor in which the operation is completely switched to the backup processor.thus enabling the construction of a network with up to 64 panels. The iRIS8 B is the first Teletek panel that can work with its new range of wireless detectors. Due to the fact that the panel has two processors (one main and one backup), it can work with more than 512 devices, both in normal and fault mode. Under system mode failure means a failure in the main processor in which the operation is completely switched to the backup processor.
iRIS8 B is the latest generation of addressable fire alarm panel in the Teletek Electronics portfolio. The possibility to integrate eight loop expanders into a single system makes the panel suitable for use in small to large buildings and installations. The panel itself has a modular structure “4+4” loops, which further helps in designing a wide range of projects. Improved for networking with Teletek panels makes it applicable for very large projects as well. With the possibility to communicate via ModBUS protocol, the panel becomes easy to integrate into a Building Management System (BMS) for so-called “smart buildings”. It supports the ModBUS TCP/IP and RS485 communication protocols, thus enabling the construction of a network with up to 64 panels. The iRIS8 B is the first Teletek panel that can work with its new range of wireless detectors. Due to the fact that the panel has two processors (one main and one backup), it can work with more than 512 devices, both in normal and fault mode. Under system mode failure means a failure in the main processor in which the operation is completely switched to the backup processor.
SIMPO is the perfect solution for smaller addressable installations. The addressable panel supports up to two loops with coverage of 48 zones. 250 devices operating on Teletek Electronics communication protocol could be connected to each loop. System status is visualized via LCD display and LED indication. Up to 64 Simpo panels can be connected in RS485 redundant network or Ethernet network. Direct programming with ProsTE software is available. The panel comes in a metal casing with a multilingual LCD display and front foil for easier customization.
The Repeater is a device that duplicates the information provided by the SIMPO and IRIS addressable fire panels in order to help you get information on the current situation in the premises without having to be physically close to the main panel. The connection between the Repeater panel and the main panels has been obtained by using a redundant network module based on the RS485 interface or a standard LAN network. The monitoring information is displayed on the 7” TFT Touch Screen display. There is also LED indication available. The Repeater panel has a built-in real time clock feature and a micro USB for programming and firmware update. BOSEC certified.
